How to Make Silicone Rubber Molds for Cultured Stone

 How to Make Silicone Rubber Molds for Cultured Stone

1        Build a frame in which to create the mold, using wooden planks. Measure the size of the actual stone that you are using as a model for the cultured stone mold using a measuring tape. Cut the planks to create a box large enough to hold your measured stone with ½ inch of space surrounding the stone on all sides, and with sides 2½ inches higher than the stone. Use wood screws to connect the frame sides and bottom at the joints. Place a strip of masking tape along all joints on the inside of the frame to prevent leakage of the rubber mold-making material.

2        Place the frame onto a flat work surface. Spread a layer of clay inside the frame covering about two inches of the frame bottom, to serve as a bed to stabilize the stone as you create the mold. Spray the clay and all surfaces within the frame with mold release agent. The release agent ensures that the rubber will not stick to the sprayed surfaces.

3        Place the stone into the clay, centered inside the frame. Make sure the side you wish to recreate is facing upwards. Push the stone slightly into the clay, about ¼ inch, and then spray the exposed surfaces of the stone with the release agent.

4        Mix the rubber in a large plastic cup with a craft stick, according to manufacturer directions. Pour the rubber into the frame from a single corner, and fill the frame to the top. Tap the side of the frame as you fill it to release any air bubbles forming throughout the mixture during the pour. Allow the rubber to cure to hardness for the length of time suggested by the manufacturer.

5        Peel the rubber from the stone and out of the frame. All of the stone exposed during the fill should appear in the rubber mold. To make cultured stone, spray the inside of the mold and fill with the concrete of your choice to cure into a stone of the same appearance of the original, with a flat back for easy mounting.

Any details please scan below QR code of We chat and our Alibaba website.Thank you.

Sophie always be at your service.